My Cargo Was Stolen at the Port, but the Arrastre Denies Liability. What Are My Rights?

Dear Atty. Gab,

Musta Atty! I hope you can shed some light on a very frustrating situation I’m facing. I run a small business importing electronics from Hong Kong, and I’ve never had a problem until my most recent shipment. I imported a container van filled with various gadgets, including high-value tablets. The container arrived at the Manila South Harbor and, as per standard procedure, was turned over to the custody of the port’s arrastre operator.

The container was opened by Bureau of Customs agents for inspection in the presence of my broker, then resealed. My broker’s trucking service picked up the sealed container a few days later. He signed the gate pass, which stated the container was received in ‘good order and condition,’ and brought it to my warehouse in Quezon City. To my horror, when we opened the container, we discovered that five boxes of expensive tablets, worth around ₱300,000, were missing. The wire seals from Customs were intact, but the padlock my broker added looked like it had been subtly tampered with.

I immediately filed a claim with the arrastre operator, but they denied it. They are pointing to two things: the clean gate pass my broker signed, and a clause in the shipping documents that says ‘Shipper’s Load and Count’ (SLAC). They claim their only job was to deliver the container in the same external condition they received it, and the clean gate pass proves they did. I feel helpless. The loss almost certainly happened at the port, but their paperwork seems to protect them completely. What is the legal significance of a gate pass and this SLAC term? Am I left with no recourse?

Hoping for your guidance.

Sincerely,
Mario Rivera

Dear Mario,

Thank you for reaching out. I understand how distressing and financially damaging this situation must be for your business. It is a common source of confusion for importers who, despite taking precautions, find themselves at a loss with seemingly nowhere to turn.

The core of your issue revolves around legal responsibility and evidence. In Philippine law, an arrastre operator—the entity that manages cargo at the port—is presumed to be at fault if goods are lost or damaged under its care. However, this presumption is not absolute. It can be overturned with strong evidence, and the two items you mentioned—the clean gate pass and the ‘Shipper’s Load and Count’ (SLAC) term—are precisely the kind of evidence that can shift liability away from the arrastre operator and, unfortunately, back towards the consignee or shipper.

The Paper Trail: Understanding Liability for Lost Cargo in Port

To understand your rights, we must first look at the legal duties of an arrastre operator. The law treats their function as similar to that of a warehouseman or a common carrier. This means they are bound to a high standard of care over the goods entrusted to them. Their fundamental job is to receive the cargo from the ship, keep it safe, and deliver it to the person entitled to receive it—in this case, you, through your broker.

Because of this high standard, the law provides a crucial advantage to the consignee. When goods are lost while in the possession of the arrastre operator, a presumption of fault or negligence arises against them. It becomes their burden to prove they exercised the required diligence and that the loss was not due to their negligence. A similar presumption exists for sealed items.

Article 1981. When the thing deposited is delivered closed and sealed, the depositary must return it in the same condition, and he shall be liable for damages should the seal or lock be broken through his fault.

Fault on the part of the depositary is presumed, unless there is proof to the contrary.
(Civil Code of the Philippines)

This means if you can prove the container’s seals were broken while in the arrastre’s custody, the law presumes it was their fault. However, the key here is proof. Your discovery at the warehouse, after the container has been released from the port, is not enough on its own. The arrastre operator will counter this presumption with their own evidence, the most powerful of which is the gate pass.

The gate pass is more than just an exit permit; it is a legal document. When your broker signed it without any notation of damage, tampering, or protest, he legally acknowledged receipt of the container in good order. The Supreme Court has consistently held that this document is strong evidence of proper delivery.

…the signature of the consignee’s representative on the gate pass is evidence of receipt of the shipment in good order and condition.

By signing the clean gate pass, your representative effectively told the arrastre operator—and by extension, the courts—that everything appeared to be in order at the time of turnover. This act rebuts the presumption of fault and shifts the burden of proof back to you. You would now have to present clear and convincing evidence that the theft happened before the container left the port, which is a very difficult task without a contemporaneous report or notation on the gate pass.

The term ‘Shipper’s Load and Count’ (SLAC) further complicates your claim. This is a shipping arrangement where the arrastre operator has no knowledge of, or responsibility for, the contents of the sealed container.

This means that the shipper was solely responsible for the loading of the container, while the carrier was oblivious to the contents of the shipment. Protection against pilferage of the shipment was the consignee’s lookout… The arrastre operator was expected to deliver to the consignee only the container received from the carrier.

Under an SLAC arrangement, the arrastre’s primary duty is to deliver the physical container with its seals intact, not to guarantee the quantity of the goods inside. Since Customs officials broke the original seal and then applied new wire seals, the arrastre’s responsibility was to ensure those specific wire seals were intact upon release to your broker. The clean gate pass serves as their proof that they fulfilled this duty. The table below illustrates the division of responsibilities in your situation.

Party Responsibility under SLAC & a Clean Gate Pass
Shipper (Your Supplier) Properly loading and counting the items, and securely sealing the container at the port of origin.
Arrastre Operator Receiving the container, safekeeping it, and delivering it with the same external appearance and seals it had after customs inspection. Their liability ends upon the signing of a clean gate pass.
Consignee (You) / Broker Inspecting the container’s external condition (seals, locks, doors) before signing the gate pass. Noting any irregularities on the pass. Protecting against pilferage once the container is in your custody.

Given these principles, the arrastre operator has a very strong legal defense. While it feels unjust, the law relies heavily on documentation created at the moment of transfer to establish liability.

Practical Advice for Your Situation

  • Instruct Your Broker: Moving forward, you must give your broker strict instructions to meticulously inspect the container’s seals and locks before signing any gate pass. If there is even the slightest sign of tampering, they must note it down as a ‘bad order’ on the pass or write ‘Received subject to inspection.’ This notation preserves your right to claim.
  • Request a Bad Order Survey: If your broker suspects tampering at the port, they should immediately refuse to sign the gate pass and instead file for a ‘Request for Bad Order Survey.’ This triggers a joint inspection with an arrastre representative to officially document the condition of the cargo before it leaves the port.
  • Review Your Evidence: Your claim against the arrastre is weak due to the clean gate pass. Your only chance would be to find other evidence, like CCTV footage from the port or testimony from a witness, proving the theft occurred within their yard. This is often impossible to obtain.
  • Check Your Insurance: Review your marine insurance policy. A comprehensive ‘all-risks’ policy might cover this type of pilferage, even if you cannot prove the arrastre’s liability. File a claim with your insurer immediately.
  • Discuss with Your Shipper: Since it was an SLAC shipment, there is a possibility the shortage happened at the port of origin before it was even sealed. Discuss this with your supplier and review their loading procedures to prevent future issues.
  • Document Everything: Take detailed photos and videos the moment you discover a shortage in the future, noting the condition of all seals and locks. While not as strong as a noted gate pass, this documentation is crucial for any potential claim with your insurer or supplier.

I know this is not the news you were hoping for. Your situation highlights a critical lesson in importation: the transfer of goods at the port gate is the most crucial point for establishing liability. The paperwork signed at that moment carries immense legal weight.

Hope this helps!

Sincerely,
Atty. Gabriel Ablola

For more specific legal assistance related to your situation, please contact me through gaboogle.com or via email at connect@gaboogle.com.

Disclaimer: This correspondence is provided for informational purposes only and does not constitute legal advice. For specific legal guidance tailored to your situation, please schedule a formal consultation.

About the Author

Atty. Gabriel Ablola is a member of the Philippine Bar. Gaboogle is his personal blog where he shares legal analysis and commentary on Philippine law, covering areas such as Maritime Law, Corporate Law, Taxation Law, and Constitutional Law.

For professional legal services and inquiries, Atty. Ablola may be reached through ASG Law Partners at www.asglawpartners.com or gca@asglawpartners.com.

Other Posts

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *